1. When installing the embedded gas stove, cover the opening pattern on the countertop of the cabinet, and dig out the embedded hole of the cooktop according to the size of the opening plate, put the gas stove into it, and confirm that it is firm.
2. The bottom of the gas stove must have more than 40cm of free space, and the top has more than 100cm of free space.
3, the recommended cabinet countertop width is above 55cm, there must be louver vents in front of the cabinet.
4. Open the package and check the random accessories provided by the manufacturer to confirm that the attachment is correct.
5. Connect the gas stove correctly. The rubber tube should be inserted into the position of the gas stove inlet with red wire and tightened with the pipe clamp. The quality of the rubber tube used should conform to the national standard, and please pay attention to its effectiveness. the term.
6, the installation of the battery. The supplied battery should be removed from the + level plastic cover of the battery before installation . The battery box of the gas stove is located at the bottom of the cooker. Open the battery cover and confirm that the positive and negative terminals are safe.
7. After the installation is completed, open the gas valve main switch and check whether the two ends of the connecting hose are leaking. When using the soap, apply the soap liquid to the joint. If there is air bubble, please close the valve and fix the rubber tube to confirm that there is no leakage. Gas can be used.
The above is what Xiaobian brought to you. What is an embedded gas stove? The entire contents of the embedded gas stove installation steps, I believe that after reading this article, you have a basic understanding of what is embedded gas stove, if you want to know more about decoration consultation, please click to enter the decoration knowledge channel .